GB/T 34208-2017 Translated English of Chinese Standard. (GBT 34208-2017, GB/T34208-2017, GBT34208-2017): Iron and steel - Determination of antimony and tin content - Inductively coupled plasma atomic emission spectrometric methodhttps://www.chinesestandard.net, 2018 M06 2 - 16 pages This Standard specifies the method for the determination of antimony and tin content using the inductively coupled plasma atomic emission spectrometric method. This Standard applies to the determination of antimony and tin content in carbon steel and low alloy steel of chromium content (mass fraction) less than 1.50% and nickel content (mass fraction) less than 2.00%: the measuring range of antimony (mass fraction) is 0.002 0% ~ 0.12%; the measuring range of tin (mass fraction) is 0.002 0% ~ 0.13%. |
Contents
| 3 | |
Scope | 4 |
Reagents and materials | 5 |
Instruments and equipment | 6 |
Sampling and preparation of specimen | 7 |
Calculation of results | 8 |
Precision | 9 |
Test report | 10 |
Annex A Normative Standard operation of measuring instruments | 11 |
Annex B Informative Additional data of joint precision test | 14 |
Common terms and phrases
100 mL volumetric absolute intensity accordance with Equation Actual resolution Alloy structural steel analytical element analytical lines antimony and tin Antimony standard solution atomic emission spectrometer average intensity background equivalent concentration beaker blank solutions blank test calculate the average calibration solution carbon steel coexisting element concentration and detection conical flask cool to room correlation coefficient coupled plasma atomic detection limit solutions determination of antimony dilute to scale g of high-purity g/mL high-purity iron hydrochloric acid inductively coupled plasma intensity of antimony interference correction coefficient Iron and Steel joint precision test laboratories levels of antimony Low alloy steel measure the spectral mg/L interfering element mg/L tested element mL volumetric flask Nitric acid plasma atomic emission preparation of specimen preset integral relative standard deviation Repeatability limit Sampling and preparation solution contains 10.0 specified in GB/T specimen solution spectral intensities spectral lines test solution tin content tin in iron Tin standard solution